AFP Drip Irrigation Tape —
Buy Direct from the Manufacturer

AFP side-seam drip tape is available with 10 cm and 20 cm outlet spacing. Both models have a 1000.5 m roll length, 200 micron thickness and 9.5 kg roll weight, and are one continuous piece. Water flow is 2.5–3.5 L/h for the 10 cm model and 3–5 L/h for the 20 cm model. Both models have the same price; the final price is confirmed in the pro forma invoice.

What is drip tape and how is it used in modern agriculture?

Drip tape is a flexible, thin-walled irrigation line that delivers water along crop rows. Its performance and potential water savings depend on hydraulic design, filtration, soil, water quality and operation; no fixed water-saving percentage is guaranteed. Suitability for a crop or greenhouse must be checked for the selected model.

Technical specifications of AFP side-seam drip tape — 20 cm spacing

How a drip irrigation system works

Water passes through the flow paths or emitters and is released along the crop row. The side-seam model described here has 20 cm spacing. Spacing, discharge, pressure regulation and filtration must be selected together; the same specifications must not be assumed for emitter tape or other products.

Types of drip tape and how they differ

Side-seam tape uses a flow path at the edge; emitter tape uses separate drippers. Select by the actual model specification and hydraulic design. An emitter model is not automatically pressure-compensating or suitable for every slope and line length.

For a more detailed technical look, read the full article Types of irrigation tape and what each is used for and The difference between side-seam and emitter drip tape.

Features and benefits of drip irrigation tape

• Sunlight resistance: listed for one crop season; this is not a full-season warranty against every defect.
• Discharge: the current side-seam model lists 3–5 L/h; distribution depends on installation and operating conditions.
• Roll weight: 9.5 kg for the stated 1000.5 m side-seam roll.
• Installation: select line lengths and pressure settings by hydraulic design, rather than assuming suitability for any terrain.
• Packaging: shrink wrap with a tightly wound coil for unwinding.
• Fertigation: check fertilizer compatibility, filtration and operating instructions before use.

More details are on the drip tape features and characteristics page. You can also see the product quality test results in our quality control lab.

Roll length, weight and dimensions of drip tape

The current 20 cm side-seam model has a stated length of 1000.5 m, weight 9.5 kg and package dimensions 34 × 25 × 25 cm. These figures apply to this model only. Confirm the roll length, weight and discharge of emitter tape separately before ordering; other roll sizes are not implied here.

Technical specifications and standard thickness of drip tape

The current side-seam model has a 200 micron wall. Do not treat older 175 micron or other thickness ranges as available options without confirmation. Choose the model using soil conditions, crop layout, water quality and technical advice. Thickness alone does not establish suitability for stony ground, a longer service life, or subsurface installation.

Drip tape price and the cost of drip irrigation for one hectare

The final price depends on the selected model and confirmed quotation. The basis of sale and final price inquiry is the roll; the payment amount and currency are agreed in the pro forma invoice.

• Confirm the exact product model and its current specifications.
• State the required quantity and unit in the inquiry.
• Export minimum order: 2500 rolls of nominal 1000 m tape; this minimum does not apply to domestic orders.
• Delivery is ex factory; the buyer arranges and pays for transport.
• Production time depends on order volume and capacity and does not include transit time.

How many rolls of drip tape are needed for one hectare?

Illustrative calculation, not a crop-spacing recommendation: tape length = 10,000 ÷ tape spacing in meters. Whole-roll counts below use the stated 1000.5 m roll and are rounded up. Assumes one tape per row over a full planted hectare, before allowances for paths, headlands, offcuts and spare material. Confirm the final layout and quantity.

Also include three other cost items in the budget for one hectare: fittings and accessories (layflat or polyethylene pipe, branch valves, disc or screen filters, connectors), which make up a significant share of the initial investment; installation and labor costs for laying the tapes properly; and seasonal maintenance costs, including flushing the lines and clearing clogs. For an accurate estimate for your own land, you can use our agricultural land inspection service or the order request form.

Complete guide to installing and maintaining drip irrigation tape

Proper installation steps for drip tape

1. Prepare and roughly level the planting bed, and remove clods and sharp stones.
2. Install the manifold (supply pipe) at the head of the rows, and fit the filter and the pressure-regulating valve.
3. Lay the roll along the crop row, without twisting and without stretching the tape too much.
4. Connect the tapes with standard fittings (start connectors, couplers and clamps) and close the ends of the lines.
5. Trial-fill at the working pressure confirmed for the selected model and installation; check for leaks and compare discharge at the start and end of each line. Do not use the maximum pressure-tolerance figure as the operating target.

A step-by-step visual tutorial is available in How to install irrigation drip tape.

Maintenance tips and extending service life

• Flush the ends of the lines at the start of the season and periodically afterwards to remove sediment.
• Use suitable filtration (screen or disc) to prevent the emitters from clogging.
• Check the pressure gauge weekly and inspect the lines visually for tears and leaks.
• Use chemical cleaning only under model-specific technical guidance, with compatible chemicals and appropriate safety precautions.
• Collect the tapes properly at the end of the season and hand them over to recycling centers.

Additional information is available in the article Maintenance and management of irrigation drip tape.

Main components of a drip irrigation system

• Drip tape / drip line: The main artery that distributes water across the field.
• Emitter unit: Releases water at a defined, controlled flow rate.
• Supply pipes (manifold): Carry water from the source to the head of the crop lines.
• Filtration station: The heart of the system, preventing the irrigation tape from clogging.
• Valves and fittings: Control the flow, switch sections on and off, and connect the lines.

Buying drip tape from the manufacturer: why AFP?

For years, Abgostar Fara Parsian (AFP) (registration no. 4214, national ID 14006782047) has been manufacturing and supplying drip tape and polyethylene water pipes to farmers. Before you buy irrigation tape, check the following:

• Confirm the exact model, stated dimensions, discharge and pressure requirements.
• Warranty covers seam opening at the first irrigation at suitable working pressure, after company inspection and approval; it is not a blanket growing-season guarantee.
• The stated packaging is shrink wrap and a tightly wound coil; confirm any extra shipping packaging before dispatch.
• Confirm availability of any nonstandard spacing, thickness or roll length before ordering.
• Check the agreed specification and price per roll; roll weight alone is not proof of quality.

Products are shipped across Iran, including Isfahan, Khuzestan, Fars, Kerman, Razavi Khorasan, East and West Azerbaijan, Kermanshah, Ilam, Mazandaran and Golestan. To see the models and place an order, use our order request form or visit the Contact Us page.

Frequently asked questions about drip tape and irrigation tape

AFP side-seam drip tape is available with 10 cm and 20 cm outlet spacing. Both models have a 1000.5 m roll length, 200 micron thickness and 9.5 kg roll weight, and are one continuous piece. Water flow is 2.5–3.5 L/h for the 10 cm model and 3–5 L/h for the 20 cm model. Both models have the same price; the final price is confirmed in the pro forma invoice.

AFP drip-tape models

10 cm model · 20 cm model